EY75A2X Cordless Wrench (Tool Body Only)
- 4.2Ah, Dual Voltage ready - can be use as an 18V or 14.4V tool. Compact, lightweight.
- 4.2Ah High Capacity Battery
- Dual Voltage Ready - Can be use as an 18V or 14.4V tool
- Tough IP56 Rated - Water and Dust Resistance
EY75A2X Tough IP Li-ion 18-volt 4.2Ah cordless 1/2" Square-Chuck Impact Wrench (Tool Body Only)
For high-capacity, heavy-duty fastening jobs
Professional tradesmen, who do repetitive bolt/nut fastening, scaffold assembly and disassembly and repetitive lag bolt driving understand the need for a compact tool that provides the power to drive fasteners quickly. The EY75A2X ½" square-chuck impact wrench can deliver 1,815 in. lbs. of variable speed power in forward or reverse. This versatile tool features the new Panasonic Dual Voltage Technology which allows the user to use the cordless impact driver as an 18V or 14.4V tool.
The High/Hardsetting is best for heavy driving jobs such as setting lag bolts, tightening large bolts and nuts or driving long screws. In this setting, it delivers 0-2,300 no-load rpm, 1,815 in. lbs. of torque and 0-3,500 impacts/minute (ipm). The Medium setting is suited for driving self-tapping screws and conduit clip fasteners, delivering 0-1,400 no-load rpm, 1,240 in. lbs. of torque and 0-2,800 ipm. For delicate fastening jobs that require controlled power and finesse, such as installing hinges on cabinets and fastening wall plates to electrical boxes, the Low/Soft setting delivers 0-1,000 rpm, 440 in. lbs. of torque and 0-2,000 ipm.
An electric brake stops the ½" square chuck instantly in all modes; a built-in LED light greatly improves work visibility. Weighing just 3.75 lbs. with battery, the compact tool measures just 2-13/32" wide, 9-17/32" tall and 6-1/8" long. A convenient built-in belt hook keeps the tool handy. The EY9HX110E ¼" hex quick-change chuck adapter is available as a standard accessory.
High-tech components deliver speed, power and durability
The tool's brushless motor, durable switch and sealed control circuits in the tool body and battery pack deliver top power, speed, runtime and long tool life. Because electronics replace brushes in the tool, the tool creates less heat and uses power much more efficiently than conventional motors found in many cordless tools. That means longer runtimes between charges, cooler operation and longer tool and battery life.
Tough and long-lasting battery packs
The tool, powered by Panasonic's exclusive 14.4-volt 4.2Ah LSLi-ion battery pack, is built for heavy use, long runtimes between charges and long cycle life. Unlike manganese-based Li-ion batteries used in many cordless power tools, Panasonic's exclusive cobalt Li-ion battery technology produces less internal heat buildup that can kill battery packs. The battery packs also feature Panasonic's Solid Solution technology, a proprietary process for dissolving and hardening cobalt and nickel and other key battery components. This unique chemistry dramatically improves battery pack safety, reliability and power output. A special heat-resistant ceramic coating layer separates cells and protects them from heat buildup. Together, the chemistry, battery design and manufacturing process add up to powerful batteries that promise to deliver long running lives.
Battery packs that are smart, too
Sometimes professional users are their own tool's worst enemy, attempting to push them past their design limits. This can lead to irreversible battery or tool damage. That's why Panasonic 4.2Ah LS battery pack cells are independently monitored for even discharge while preventing over-charging and over-discharging. An over-discharge sensor prevents the user from running the tool after it reaches the point where too-low voltage output could damage the battery or the tool. Plus, an internal temperature sensor flashes a warning light if internal temperatures rise, and then cuts off tool power if battery temperature reaches critical levels.
Water getting into the battery doesn't have to mean it's a goner. Panasonic engineers have added vents built in the battery case so water can easily drain out of the battery pack. The battery, which is easy to remove using a simple slide-down release button, can charge to 80 percent capacity in 55 minutes and fully charge in 70 minutes when charged with the EY0L82B charger, The charger comes with the kit that includes the tool, two 4.2Ah Li-ion battery packs and carrying case.
Tough tools for tough conditions
The EY75A2X cordless impact wrench has an IP56 rating that proves the tool's toughness claims. This rating means the tool has withstood demanding laboratory tests of working in extremely dusty work environments and the effects of water getting sprayed on the tool by powerful jets. In the field, it assures professional tradesmen have a tool that can stand up to the rigors of hard jobsite use.
The IP rating is established by the International Electrotechnical Commission (IEC) and is outlined in IEC 60529. The standard outlines a coding system that indicates the degree of protection an electrical machine's enclosure offers internal components. Based on objective testing, it assigns a rating to the enclosure's ability to keep potentially damaging solid foreign objects (dust and contaminants) and water out of the tool under increasingly difficult conditions. The dust protection test subjects the tool to a very dusty environment and then puts it to work to assure the tool was unaffected by dust exposure. In the grueling test, the tool proved that it achieved a dust protection level of five out of six levels; the sixth level is for dust-tight tools. It's a good indication that the tool's design keeps potentially harmful contaminants out, assuring long life and top performance that professionals demand.
Similarly, the water protection test put the tool up against increasing levels of water exposure. It attained a six out of eight levels rating, withstanding the effects of powerful water jets.
Whether it's extremely dust work conditions or work in damp or wet locations, users will appreciate a tool that will keep working when others would likely fail. Consult the safety and operating instructions for more information.
Learn more about Panasonic's Intelligent Power Tools and the IP56 code, view What Is Tough IP
Proof of performance
The EY75A2X cordless impact wrench built to work as hard as the professional using it. It's built for a wide variety of repetitive bolt and nut fastening.
- Battery Capacity 4.2Ah Li-ion
- Dual Voltage Ready Yes
- IP56 Approved Yes
- Voltage 18V
- High Power 1,815 in.lbs.
- Speeds 3
- Brushless Motor Yes
High/Hard Mode: 1,815 in.lbs.
Medium Mode: 1,240 in.lbs.
Low/Soft Mode: 440 in.lbs.
Speed at No. Load
High/Hard Mode: 0-2,300 rpm
Medium Mode: 0-1,400 rpm
Low/Soft Mode:0-1,000 rpm
High/Hard Mode: 0-3,500 ipm
Medium Mode: 0-2,800 ipm
Low/Soft Mode:0-2,00 ipm
- Weight (including battery) 3.75 lbs
- Compact Size (L x H x W) 6-1/8" x 9-17/32" x 2-13/32"
- Electric Brake Yes
- LED Work Light Yes
Usable: 65 minutes
- Power Supply Kits
You May Also Like
Link2Cell Digital Phone with Smartphone Integration and Answering Machine KX-PRD262B 2 Cordless Handsets
In Stock$199.95 $129.95