HS900K 3MOS HD Camcorder
Model number: HDC-HS900K
Welcome to the Panasonic Store Locator
Find a Store
The stores below carry the product you are looking for. Visit the location to see first hand how Panasonic is engineering a better world for you. In-store product availability may vary, we recommend checking availability with the store location.
To see a store near you,
please see our store locator.
*The optional VW-CLT1 3D Conversion Lens is required for shooting 3D images.
**Does not apply to SD800.
***Availability of models and colors may differ depending on the sales area.
High Quality Picture & Sound
The 900 Series and SD800 employ the 3MOS Sensor, with its three-sensor configuration. This provides a resolution of 7.59 million effective motion image pixels (2.53 million x 3). The 3MOS Sensor splits the light information captured by the lens into the three primary colors - red, green and blue - and processes each color with its own individual sensor. This reduces light loss compared to the 1MOS sensor, and renders colors, details and gradation all with intricate detail and natural beauty. This superb color reproduction maximizes the inherent quality of Full-HD progressive images.
A bright, high-performance lens.
The 900 Series and SD800 use Leica Dicomar lenses, which are renowned for their ability to render sharp images and excellent shading. They also suppress ghosting, flare, and distortion at the image edges. Even in strong sunlight, these superb lenses maintain high contrast and resolution. A bright new F1.5-F2.8 lens with a 46mm filter diameter has been created for the 900 Series and SD800. Efficient light collection allows the new lens to capture bright, clear images even in dim lighting or at high shutter speeds. This high-end lens brings out all the beauty of Full-HD images.
* Leica is a registered trademark of Leica Microsystem IR GmbH, and Dicomar is a registered trademark of Leica Camera AG.
Intricate details from Intelligent Resolution Technology.
The Crystal Engine PRO instantly processes the huge amount of data that goes into Full-HD images, and further enhances Full-HD quality. It produces smooth, high-resolution zoom shots even when the range exceeds the limit for optical zooming. Crystal Engine PRO clearly delineates even the tiniest details of your subject, with extremely natural beauty. In addition, its Noise Reduction (NR) technology has been completely redesigned. The low-frequency noise that occurs when recording in dim lighting has been further minimized. Compared to previous Panasonic models, noise has been reduced by approximately 45%.* And Intelligent Resolution Technology ensures sharp and crisp pictures, resulting in bright and beautifully colored motion images.
* Compared with the HDC-SD700, HDC-TM700, and HDC-HS700
Sharpens details and enhances smooth areas.
The Intelligent Resolution Technology incorporated in the Crystal Engine PRO uses edge detection technology to confirm the edges of objects within the image, then emphasizes the edges for optimal clarity. For example, it brings crisp definition to patterns and the outlines of objects like flowers. Conversely, it reduces noise and enhances the natural smoothness of parts without edges, like the sky. The increased sharpness is especially effective for images with delicate details. This highly advanced technology maximizes the beauty of Full-HD images.
Beautiful zoom shots of distant subjects.
The 900 Series and SD800 feature an Intelligent Zoom function that goes all the way up to 20x. When using Intelligent Zoom, Intelligent Resolution technology lets you shoot at high zoom rates while preserving the image resolution. You get sharp images of highly detailed objects without the blurry edges. Plus, the 900 Series and SD800 are equipped with HYBRID O.I.S, an image stabilization system that corrects hand-shake blurring by combining the action of its hybrid optical and electrical image stabilization systems. Even when zooming, where hand-shake often occurs, both optical and electrical hand-shake correction make it possible to record beautiful images with approximately 2 times* the hand-shake suppressing effect as conventional models.
* Compared with the HDC-SD700, HDC-TM700, and HDC-HS700.
Captures large groups, even when shooting from up close.
The 35mm wide-angle lens on the 900 Series and SD800 fit more people and more of the background into the frame than a conventional lens. This is especially handy when you want to take a group photo in a small room.
* 35mm camera equivalent
Capturing voices over a wide area for a more life-like sound.
The 900 Series is equipped with five electret condenser microphones. The center mic helps capture the sound source and distance accurately, so you get a more 3-dimensional effect. The Zoom Mic function improves noise-reducing performance and handles higher zooming power, allowing you to clearly capture target sounds. You get a realistic sound space that's a perfect match with the true-to-life HD images.
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are registered trademarks of Dolby Laboratories.
Picks up audio from all directions to reproduce a natural, lifelike sound field.
In Zoom mode the microphones are linked to the lens action. When you zoom in on a subject, the microphones focus on the sound in that same direction.
Shooting Functions
When the 3D Conversion Lens is attached, the 900 Series and SD800 produce an effect called visual disparity. Right and left images are captured simultaneously by the two lenses, and recorded using the side-by-side method. To play back 3D videos, simply insert an SD Memory Card in the slot of a Panasonic VIERA 3DTV.** Or you can use an HDMI mini cable to connect the camcorder to a VIERA 3DTV or another 3D TV that is compatible with the side-by-side method.
* The optional VW-CLT1 3D Conversion Lens is required for shooting 3D images.
** Some models of VIERA 3DTV may require a firmware update to play 3D images from an SD card. For details, please visit http://panasonic.net/avc/viera/information_3dviv/
Makes optimal settings automatically for both motion and still images.
This powerful function senses the shooting conditions and automatically makes the settings and activates functions that will deliver optimal results. With both motion and still images, iA does the bothersome settings for you and makes it easy to capture beautiful, well-focused images.
* The functions included in iA may not be applied when conditions do not call for them.
Blur-free zooming and shooting on the move.
HYBRID O.I.S. corrects hand-shake blurring by combining the action of its hybrid optical and electrical image stabilization systems. Even when zooming, where hand-shake often occurs, both optical and electrical hand-shake correction make it possible to record beautiful images with approximately 2 times* the hand-shake suppressing effect as conventional models.
* Compared with the HDC-SD700, HDC-TM700, and HDC-HS700.
Active mode comes in handy when shooting while walking or playing with your children. The wide correction area corrects even relatively large hand-shake motion. It's especially good for active video shooting.
The manual ring gives you easy, fingertip control over the focus, zoom and exposure settings. You'll find using the ring a much more intuitive, comfortable, user-friendly process than accessing a menu screen. With the manual ring and manual operation, the HD900 Series is a pleasure to use and gives you the freedom to craft unusually expressive images.
Just rotate the ring to zoom in and out. You have full control of the zooming speed and can zoom in or out to the precise degree you want.
Just rotate the ring to focus. You can focus on the exact point you want, even if it's not in the center of the frame. You can also change the focus as you shoot, to get the kind of creative shots you sometimes see in movies.
Select from Auto, Indoor, Outdoor and White Set according to the location, weather or type of lighting. You'll always get the best possible coloring even if the light source changes.
The shutter speed can be adjusted from 1/24 to 1/8,000 of a second.* Use a high shutter speed when shooting sports events or fast-moving subjects, and you can get clear, sharp, incredible action shots.
* In PAL areas, 1/25 to 1/8,000 of a second.
Use the ring to adjust the aperture to regulate the amount of light let in. You can also use this setting to attain a shallow depth of field, blur the background, or create frames that emphasize the foreground, for creating movie-like expressions.
Click on the links below to reveal contact information.
Live Chat: Click here
Email: Click here
Call: 800-405-0652
Operating Hours:
Mon-Fri 8am-9pm EST
Sat-Sun 12pm-5pm EST
Live Chat: Click here
Email: Click here
Call: 800-405-0652
Operating Hours:
Mon-Fri 8am-9pm EST
Sat-Sun 12pm-5pm EST
Live Chat: Click here
Email: Click here
Call: 800-211-7262
Operating Hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Live Chat: Click here
Email: Click here
Call: 800-211-7262
Operating Hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Live Chat: Click here
Email: Click here
Call: 800-211-7262
Operating Hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Call: 800-332-5368
Operating Hours:
Mon-Fri 9am-9pm EST
You will never have to worry about unexpected or unplanned repair bills. The coverage covers parts and labor to keep product in good operating condition. If you have in home service during the factory warranty then the same is provided during the extended period. If you have carry in service, then you have the same during the extended period.
Ensures only authorized and highly trained techinicians with up-to-date diagnostic tools will work on your product. Knowing how important your product is to you, servicers will repair your product as quickly as possible. Only Panasonic parts and components are used.
When you need service just call the Panasonic 800 number and someone will contact you within 24 hours.
In addition, the service is transferable to a new owner!
Your Plan is priced to offer you affordable protection for your valuble electronics product. The coverage will cost you just pennies a day and there are no deductibles.
This document sets forth the entire Contract between the Service Contract Administrator hereinafter referred to as We, Us and Our, and, the Purchaser as You and Your. No representation, promise or condition herein shall modify these terms. Service Net Warranty, LLC ("Service Net") is contractually obligated to You to provide service under this Contract where in accordance with, and as allowed by state law. If this Contract is purchased in Florida or Oklahoma, Service Net Solutions of Florida, LLCis contractually obligated to You to provide service under this contract.
1.What Is Covered. We will furnish labor, parts, and/or replacement equipment (or pay for same) necessary to repair operational or mechanical breakdowns of the product specified in this Contract, provided such service is necessitated by product failure during normal usage. The product specified and covered includes only equipment as originally configured and charged for in this Contract. Coverage also applies to the parts and accessories that are necessary to the covered product's functionality, but does not apply to accessories that are used in conjunction with or to enhance the performance of the covered product. The maximum liability owed to You under this Contract will be the full retail cost of Your Product minus the sales tax. In the event We (I) replace the Product with a Product with equivalent specifications or (II) reimburse You for the current market value of the Product with equivalent specifications or (III) reimburse You for the retail amount of the Product, less claims made, minus sales tax, We shall have satisfied all obligations owed under this contract. Power Surge and Spike: This service plan protects against operational failure of a covered product if a failure occurs while connected to a surge protector approved by the Underwriter's Laboratory. Your surge protector may be collected by the Administrator for examination.
2.TO OBTAIN AUTHORIZATION FOR REPLACEMENT (ON REPLACEMENT CONTRACTS ONLY):
You must obtain authorization prior to the receipt of a replacement Product.
Call the toll free number listed on the reverse side of this Service Contract.
Have this Contract, Your Contract number, and the original Product receipt available.
Instructions on obtaining replacement will be given.
Once authorization is obtained You may be required, at Your expense, to return the Product to Service Net.
This Product is not to be taken to the Retailer.
At Our determination, You will receive a replacement Product of like grade and quality. Technological advances may result in a replacement product with a lower selling price than
the original Product. In all cases where a replacement cannot be made, You will receive reimbursement for the original purchase price, excluding sales tax, delivery and installation.
All contractual obligations are considered fulfilled upon Product replacement, reimbursement or Contract term expiration.
We reserve the right to replace the Product with a remanufactured or refurbished Product.
The replacement Product will be mailed to You at no cost.
3.DEDUCTIBLE. No deductible applies to this Contract.
4.IMPORTANT NOTE. Repairs recommended by the repairing facility not necessitated by mechanical breakdown are not covered unless specifically authorized by Us. We reserve the right to inspect the items to be covered, or the items covered, as the case may be, prior to coverage or during the coverage period. Model number, serial number and original date of purchase of all items to be covered must be provided to execute application for service. If You request a service call for a non-covered repair, You will be responsible for all osts associated with the repair. In the event You are unable to meet the servicer, You must call to cancel the appointment in advance of the agreed upon time of service. You may be responsible for paying the second trip charge for the subsequent rescheduled repair. If the product is found to be performing to the manufacturer?s specifications, it will be returned to You. This contract must be paid in full prior to services being rendered.
5.TIME FOR SERVICE. Service will be performed during the hours of 8:00 a.m. to 5:00 p.m. local time Monday through Friday, excluding holidays. Any additional costs above the service providers authorized hourly rate (premium or overtime charges) or after hours service will be at Your expense with exception of health related or severe weather related emergencies.
6.PLACE OF SERVICE. Service will be provided by a manufacturer authorized service center, or the Dealer named in this Contract. After We authorize Your claim, We will arrange for service and We will cover the reasonable parts and labor costs that We authorize. You may be asked to provide proof of purchase as a condition for receiving service under this Service Contract. Your original purchase receipt should be kept with this service Contract in a safe place. (a) On-site service will be provided for Major Appliances and televisions greater than 42 screen size. All televisions (LCD, Plasma, Projection) with a screen size between 19 and 42 may be serviced either on-site or by depot repair, at Our discretion. If depot service is required, the cost to transport and/or ship the Product for service will be paid by Us. On-site service, if applicable, will be provided when Your residence is located within fifty (50) miles of an authorized service provider. If You are entitled to on-site service but due to environmental and/or technical requirements, certain repairs can not be completed in Your residence, or if You are located more than fifty (50) miles from the nearest authorized provider, the cost to transport and/or ship the Product for service will be paid by Us. On-site service where applicable requires clear, complete and easy access to the product by the authorized service provider and does not include removal or re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of the product, at the servicer's discretion be removed for shop diagnosis and/or repair and then returned. (b) All other Product categories are covered for carry-in or depot service.
7.PARTS AND SUBCONTRACTING. Parts used to repair equipment may either be new or refurbished at Our sole option. Service may be performed by subcontractors.
8.UNAVAILABILITY OF FUNCTIONAL PARTS OR TECHNICAL INFORMATION. If We determine that We are unable to repair Your Product due to the unavailability of functional parts, service or technical information, the total liability owed to You under this Contract will be the lesser of (I) the current market value of a Product with equivalent specifications or (II) the retail price paid for Your Product minus sales tax and claims paid, in lieu of service repairs or replacement of the Product with equivalent specifications. In all cases where parts or technical information are on extended backorder for a minimum of sixty (60) calendar days, We will determine if a replacement or reimbursement will be made. All contractual obligations are fulfilled, in lieu of repairs, upon Product replacement, reimbursement or Contract term expiration. Technological advances may result in a replacement Product with a lower selling price than the original Product. If We replace the Product or buyout the Contract, the covered Product becomes Our property and We may, at Our discretion, require the Product to be returned to Us (or Our designee) at Our expense.
9.RENEWABILITY. This Contract is renewable at Our sole discretion.
10.LIMITATIONS OF COVERAGE. This Contract Does Not Cover: A. Any equipment located outside the United States. B. Service required as a result of any alteration of the equipment, or repairs made by anyone other than a participating servicing dealer, an authorized service provider, its agents, distributors, contractors or licensees, or the use of supplies other than those recommended by the manufacturer. C. Damage or other equipment failure due to causes beyond our control including, but not limited to, repairs necessary due to operator negligence, the failure to maintain the equipment according to the owner?s manual instructions, abuse, vandalism, theft, fire, flood, wind, freezing, power failure, inadequate power supply, unusual atmospheric conditions, or acts of war or acts of God. D. Service necessary because of improper storage, improper ventilation, including failure to place the equipment in an area that complies with the manufacturer‘s published space or environmental requirements. Misuse, abuse and any utilization of equipment that is inconsistent with either the design of the equipment or the way the manufacturer intended the equipment to be used, including cases in which the manufacturer of the equipment would not honor any warranty. E. Any utilization of equipment that is inconsistent with either the design of the equipment or the way the manufacturer intended the equipment to be used. Any installation that prevents normal service. Any and all cases in which the manufacturer of the equipment would not honor any warranty regarding the equipment. F. Equipment used commercially or in a commercial setting. An industrial or commercial setting is defined as anything other than a single family dwelling. Single family dwellings include: Houses, Townhouses, Modular Housing, Condominiums, Duplexes, and Apartments. Equipment used in recreational vehicles is not covered. G. Cosmetic damage such as, but not limited to scratches, dents, rust, stains. Expendable or lost items, such as, but not limited to ear buds or head phones. H. Consumable items are defined as any part that is considered consumable by the manufacturer and/ or any item that is designed to be consumed (wear out) during the life of the Product, regardless if it is consumer replaceable or not. Consumable items include, but are not limited to For Consumer Electronics: light bulbs, lamps (unless purchased as additional coverage), and batteries. For Printers, Copiers, and Multifunctional Equipment: ink, fuser, roller kits, maintenance kits, paper trays, and any toner/cartridge. For all Products: Telephone or other lines connecting to the equipment. I. In-warranty parts not provided or shipped by the manufacturer. Operational or mechanical failure covered by manufacturer?s warranty, manufacturer?s recall, improper construction, or factory bulletins, (regardless of whether or not the manufacturer is doing business as an ongoing enterprise). Defects in the equipment due to the manufacturer?s error or improper construction of the equipment. J. Any software, including but not limited to, application programs, network programs, upgrades, formatting of any kind, databases, files, drivers, source code, object code or proprietary data, or any support, configuration, installation or reinstallation of any software or data. K. Normal, periodic or preventative maintenance, customer education and cleanings. L. Consequential damages as a result of malfunctioning of or damage to an operating part of the covered equipment or damages as a result of any repairs or replacements under this agreement. Damages caused by delays in rendering service or loss of use during the period that the product is at the authorized service center or otherwise awaiting parts are not covered. M. Loss or damage as a result of violation of existing federal, state and municipal codes including repairs to products not complying with said codes. N. Pre-existing conditions (incurred prior to the effective date of coverage), and known to You. O. Equipment where the serial plate attached to the equipment is removed, defaced or made illegible. P. Markings or retained images on the glass panel resulting from viewing fixed images (including, among other things, non-expanded standard 4:3 pictures on wide screen TVs, or onscreen data in a stationary and fixed location). Damaged or defective LCD screens when the failure is caused by abuse or is otherwise excluded herein. All display products that are used in an application that requires continuous and/or business operation. Q. Damage resulting from unauthorized repair; software virus; improper electrical wiring and connections; damage caused during delivery, improper installation, or setup, user facilitated minor adjustments and settings outlined in the product?s owners manual, external antenna or local reception problems, inaccessible products or parts, negligence, misuse or abuse whether willful or not. R. Payment for subsequent service calls which result in "no failure found" diagnosis. Non failure problems including but not limited to noises or squeaks. Subsequent trip charges may need to be paid by You if a second "no failure found" diagnosis is determined based on the same problem. S. Broadcast grade models are not covered by this program. Repair of resolution (pixels) failure must match the factory minimum standards before an authorized repair occurs. T. Equipment sold without a manufacturer?s warranty, sold "as is" or sold as refurbished Products or is located in a rental property. U. De-installation, removal, or reinstallation of any equipment. V. Any cost recoverable under any other warranty, guarantee, or under an insurance policy (in such case, this Contract will cover any applicable deductible). W.Transit or delivery damage, damage caused by packing, unpacking, assembly, installation, or removal. Short circuit, loss of use, parts or labor covered under the manufacturer?s warranty, lack of maintenance, bodily injury, pre-existing conditions, manufacturer?s recall, periodic checkups or maintenance. We will not pay for adjustments or repairs required because of conditions at your location. X. Electronics and PC equipment over 5 years of age.
11.NO LEMON GUARANTEE. During the term of this Contract, when three service repairs, with three separate claim numbers, have been completed on the same part, and that same part requires repair under a fourth claim number, as determined by Us, Your Product will be replaced with a Product of like grade and quality by Us, not to exceed the original retail purchase price. In the event a comparable replacement cannot be located, a buyout, not to exceed the original retail purchase price, will be provided. This does not include repairs necessary during the manufacturer?s warranty period, rework/ callback service required after initial service, during the warranty of work period provided by the Service Company, or previous service Contract terms. Once you have received Your Product replacement or buyout all contractual obligations under this Contract have been fulfilled.
12.CANCELLATION AND REFUND. You may cancel this contract at any time for any reason. If You cancel this Contract within sixty (60) days of the date purchased You will receive a refund of the full purchase price less any claims. If You cancel this Contract thereafter, You will be refunded the remaining days of coverage on a monthly prorated basis, less costs for service performed (if applicable). No refund will be issued if the prorated refund amount is less than or equal to $5.00. We, at Our sole option, may cancel this Service Contract due to non-payment. If We cancel this Service Contract due to non-payment, You will not receive a refund. Neither You nor the Dealer nor We are obligated to renew this Contract beyond the current term.
13.CLAIMS LIMITATION. The total claims limitation under this Contract is the retail price paid for Your Product minus sales tax, claims paid, delivery and installation. During the term of the Contract We may elect, at Our option, to buyout the Contract for the original purchase price of the covered Product less claims paid, less sales tax, delivery and installation, or replace the Product with a comparable Product. In the event We reimburse You or replace the Product We shall have satisfied all obligations owed under this Contract.
14.BUYOUT. We may elect, at Our option, to buyout the Contract during the coverage term for the lesser of (I) current market value of a Product with equivalent specifications or (II) retail price paid for Your Product minus sales tax and claims paid. When determining the current market value of a Product of equivalent specifications a fair analysis is completed using current manufacturers? and distributors? pricing on comparable products. All contractual obligations are considered fulfilled upon buyout of the Product. You have up to forty-five (45) days from the date of authorization to complete your product buyout transaction. Technological advances may result in a replacement product with a lower selling price than the original Product. If We buyout the contract, the covered product becomes property of Service Net and We may, at Our discretion, require the product to be returned to Us (or our designee) at Our expense.
15.STATE VARIATIONS. Certain states have specific conditions; conditions listed on the front of this form apply to You.
16.TRANSFERABILITY. You may transfer this Agreement to any person by sending written notice to: Service Net, P.O. Box 1411, Jeffersonville, IN 47131-1411.
17.NOVATION. If Service Net assigns another insurance carrier with an "AM Best" industry rating of A- or better under this Contract directly or indirectly, such new insurance carrier will carry the liability under this Contract.
18.RIGHT TO RECOVER FROM OTHERS. If we make any payment, we are entitled to recover what we paid from other parties. By accepting settlement of a claim, You transfer to us your right to recovery against any other party.
19.COVERAGE AND TERM. This is not an insurance policy. As the Administrator, We will assist You in understanding Your warranty and coverage benefits from the day You purchase Your Plan. If Your Product needs repair for operational or mechanical failure, You are required to call the toll free number listed on the front of this Contract or submit Your claim in writing to Service Net, 650 Missouri Ave., Jeffersonville, IN 47130. With any correspondence, please provide Your daytime phone number and claim number if applicable. If We fail to pay or provide service on a claim within 30 days after proof of loss has been filed, or in the event We are no longer a going concern, please enclose a copy of Your plan when sending correspondence to the Insurer. The expiration date and price of this Contract are listed on the face of this Contract. There are some limitations of coverage. You should review the limitations of coverage paragraph for details. This Plan is secured by a contractual liability or reimbursement insurance policy provided by either Illinois National Insurance Company or New Hampshire Insurance Company Inc., 175 Water Street, 20th Floor, New York, NY 10038. Telephone 1-800-250-3819. If, within sixty (60) days, we have not paid a covered claim, provided you with a refund or you are otherwise dissatisfied, you may make a claim directly to the insurance company.
20.ENTIRE CONTRACT. This is the entire Contract and no other oral modifications are valid.
21.LIMITATION OF LIABILITY. THE DEALER/RETAILER, SERVICE SAVER, INCORPORATED SERVICE NET, THEIR AGENTS, CONTRACTORS OR LICENSEES WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, PROPERTY DAMAGE, LOST TIME, LOST DATA RESULTING FROM THE BREAKDOWN OR FAILURE OF ANY EQUIPMENT OR FROM DELAYS IN SERVICING OR THE INABILITY TO RENDER SERVICE ON ANY COVERED EQUIPMENT. EXCLUSION IS MADE OF ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES MADE HEREIN. If You have any questions, require customer service, or wish to report a claim, please contact: Service Net, 650 Missouri Ave., Jeffersonville, IN 47130