Images KX-TG4773B, , HeroImage
overview

Expandable Corded/Cordless Phone with 1 Corded Handset and 3 Cordless Handsets

Details
KX-TG4773B
Features
  • Enjoy clearer sound and longer range with DECT 6.0 Plus
  • Stay connected when power goes out with battery backup
  • Hear who's calling with advanced Talking Caller ID
  • Maximize convenience with one corded and three cordless handsets

Accessories

SEE ALL ACCESSORIES

SpecificationsExpand All

  • More Details
    • Color
    • Frequency
    • System
    • Number of Channels
    • Number of Handsets (Capability)
    • Number of Phone Line
    • LCD Language
    • Call Block
    • -Registered from Function menu
    • -Registered from Caller list
    • Silent mode
    • Light-Up Indicator (Ringer / Charge Indicator)
    • Ringer ID
    • Icon Operation (function menu)
    • Menu Operation
    • Intelligent Eco Mode
    • Repeater
    • Voice Equalizer
    • power backup operation
    • Caller ID
    • Caller ID Memory
    • Call Waiting Caller ID
    • Talking Caller ID (Base)
    • Talking Caller ID (Handset)
    • Voice Mail
    • LCD Backlit Color
    • Lighted Handset Keypad
    • Ringer Pattern ( Tone + Melody )
    • Ringer Volume
    • Redial Memory (Handset)
    • Hold
    • Mute
    • Flash
    • Receiver Volume ( Talk Volume)
    • Speakerphone Volume
    • Intercom (Handset to Base)
    • Intercom (Handset to Handset)
    • Conference Call with Outside Line
    • Barge in ( Call Share )
    • Any Key Answer
    • Clock
    • Alarm
    • Battery
    • Talk Time
    • Standby Time
    • Charge Time
    • Headset Jack
    • Belt clip Included
    • Dial Keypad
    • LCD (Base)
    • Base Phonebook Memory (Name & Number)
    • Redial Memory (Base)
    • (TelNo, Name from Phonebook)
    • Hold
    • Mute
    • Flash
    • Digital Speakerphone
    • Speakerphone Volume
    • Handset Locator
    • Ringer Pattern ( Tone+ Melody )
    • Ringer Volume
    • Wall Mountable
    • Answering System
    • Total Recording Time (ICM and GM and Memo)
    • Message Alert (Light-Up Indicator )
    • Speaker Volume ( Base Unit Speaker)
    • Remote Operation from Handset
    • Remote Operation from outside Line (DTMF)
    • Toll saver
    • Call screening
    • Optional Handset
    • Base Dimensions H x W x D (mm)
    • Handset Dimensions H x W x D (mm)
    • Charger Dimensions H x W x D (mm)
    • Base Weight (g)
    • Handset Weight with Battery (g)
    • Charger Weight (g)
SEE FULL SPECS

Owner's Manuals

FAQs

  • How do I change the group name?
    You can change the group name of your shared phonebook by following these procedure:
    1. On the handset press the soft key below the phonebook icon then press [MENU]
    2. Press the [▲] or [▼] button to highlight "Group"
    3. Scroll to the group you wish to edit and press [SELECT]
    4. Press [SELECT] again on "Group name"
    5. press the number pad corresponding the letters on the keys to enter your preferred group name, note that you can only enter up to 10 characters
    6. Press [SAVE] then press [OFF]
    .
  • How do I change the display language on my handset?
    You may change the display language and the voice guidance of the answering system.
    For the Display language:
    1. Make sure that the phone is not in use, press [MENU] on the handset
    2. Press [#] [1] [1] [0]
    3. Select your preferred language from the 2 options, highlight either English or Spanish by pressing the [▲] or the [▼] button
    4. Press [SAVE] then press OFF

    To change the voice guidance for the answering system, follow these steps:
    1. On the handset press [MENU], then press [#] [1] [1] [2]
    2. Select your preferred language from the 2 options, highlight either English or Spanish by pressing the [▲] or the [▼] button
    3. Press [SAVE]
  • How do I change my remote access code for my answering machine?
    A remote access code must be entered to operating the answering system remotely. This code prevents unauthorized parties from listening to your messages when your away from home. To change your remote code, perform one of the following procedures below using your cordless handset:
    1. Press [MENU] [#] [3] [0] [6] on the handset
    2. Key in your preferred 3 digit code
    3. Press [OK] or [SAVE]

    OR

    1. Press [MENU] and scroll down by pressing [▲] or [▼] until "Answering Device" is displayed, then press [OK]
    2. Press your [▲] or [▼] repeatedly until "Setting" is displayed, then press [OK]
    3. Press your [▲] or [▼] until "Remote Code" is displayed, then press [OK]
    4. Key in your preferred 3 digit code
    5. Press [OK] or [SAVE] to save the change then press [OFF]
    Note that you won't be able to access your messages from your answering machine when you are away from your phone if you forget your remote access code.
  • How do I chain dial from this phone?
    This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. Proceed in calling the number you need to contact then, start chain dialing by pressing [Ph.book] on the handset. Select your desired entry from the phonebook items then press [CALL], the phone should automatically dial the number.
  • How do I block incoming calls/ numbers?
    With caller ID service already subscribed on your line, you may use call block feature to block a call.
    You need to store unwanted callers in the call block list.
    • To store block number manually, press [MENU] [#] [2] [1] [7], and [ADD]; enter 10 digit number then press [SAVE] and [OFF].
    • To store block number from caller list, press [MENU] [#]"[2] [1] [3], then scroll to the number to be blocked and press [SAVE].

    NOTE: call block feature will not work without Caller ID service from the phone company

  • How do I adjust the volume on my handset during a call?
    To adjust the volume of the handset during a call, you can press [▲] or [▼] on the handset.
  • How do I adjust the brightness of the screen on my handset?
    You can adjust the LCD contrast of the handset by following these procedure:
    1. Make sure that the handset is not in use. On the handset press [MENU]
    2. Press [#] [1] [4] [5]
    3. There are 6 levels of selection. Press any of the number keys from 1 - 6
    4. Press the soft key [SAVE] then press [OFF]
  • How do I adjust ringer volume?
    To adjust the ringer volume on the handset, press [MENU] [#] [1] [6] [0] and press [▲] or [▼] to raise or lower the ringer volume.
  • How do I adjust incoming ringer volume?
    To adjust the ringer volume of the handset or Base unit. Press [+] or [-] on the base or [▲] or [▼] on the cordless handset repeatedly to select the desired volume while the unit is ringing for an incoming call.
  • How do I adjust base unit ringer volume? How do I turn off the base unit ringer all the time?
    On base unit, press [+] or [-] repeatedly to select the desired volume. To turn the ringer off, press and hold [-] until the unit beeps.
  • How do I add a Phonebook entry?
    On the handset press the Phonebook icon then press [ADD] then press the number pad corresponding the letters on the keys. (note that you can only add up to 16 characters) Press the soft key [OK]. Dial the number you wish to store and press [OK]. Press [SELECT] twice upon selecting a group name then press [OFF] to exit the setting.
  • How can I use the mute feature?
    While mute is turned on, you can hear the other party, but the other party cannot hear you. [MUTE] is a soft key visible on the display on the handset only during a call. You can press the soft key anytime during a call. Press [MUTE] again to return to the conversation.
  • How can I turn off the LED light on the top of my handset?
    The message indicator lights up when you have a new voicemail message, answering machine message, or when you are receiving a call. You can change the setting for the voicemail indicator and message indicator by pressing [MENU] [#] [3] [4] [0]and press [▲] or [▼] to switch between off and on, then select [Save]. It is not possible to turn off the LED for an incoming call.
  • How can I switch to speaker phone on my handset?
    You can switch to speaker phone by pressing the speaker phone button on the handset and if you would want to get to the regular talk mode on the phone just press the [TALK] button on the cordless phone.
  • How can I re-register my handset?
    To register a handset, perform the following steps:
    1. Press [MENU] →[#] [1] [3] [0] on the Handset
    2. Press and hold down the locator button on the base for about 5 seconds until you hear the registration tone (If all registered handsets starts ringing, press LOCATOR again to stop, then repeat this step, procedure needs to be completed within 90 seconds
    3. Press [OK] on the handset.
  • How can I register the warranty of my phone?
    You may register your products online by going to: &lt;a target="_blank" href="https://secure2.prodregister.com/panasonic/">https://secure2.prodregister.com/panasonic/</a>. It is not necessary to submit this form in order to effectuate the limited warranty. As long as there is a copy of the receipt, Telephone is warranted for a year starting from the date of purchase.
  • How can I register for the warranty of my product?
    You may register your products online by clicking here. It is not necessary to submit this form in order to effectuate the limited warranty. As long as there is a copy of the receipt, your product warranty begins from the date of purchase.
  • How can I join an existing outside call from another handset?
    To join an existing outside call, press [TALK] on the handset. The maximum participating parties having a conversation at the same time, including one outside party, are three (3).
  • How can I insert a pause into a phone number (for voicemail, calling card, etc.)?
    When entering a number into the phonebook, just press [PAUSE] on the handset between the two numbers you want. Each pause is 3.5 seconds, so you may need to use more than one to make sure the other end has a chance to answer first.
  • How can I conference call using multiple handsets?
    To listen in on a conversation, just pick up another handset and press talk. A maximum of 3 handsets (including 1 outside party) can join a conversation.
  • How can I conference call using multiple handsets?
    A maximum of 4 parties (including 1 outside party) can join a conversation using 3 extensions. (4-way conference)
  • Does this model have a speed dial feature?
    The system does not have a speed dial option but it has the Phone book feature which allows you to store names and their phone numbers on the handset for easy access.
  • Does my phone have the Talking Caller ID feature?
    Yes. This model has a 'Talking Caller ID' feature, you need to be subscribed to a Caller ID service from you phone company in order for it to work. This feature can be set to on or off individually for the base unit and will need to be performed on each handset.
  • Does my phone have Bluetooth capability?
    No. This model does not support Bluetooth connectivity.
  • Does my model have a room monitor feature?
    No, this model does not have a room monitor feature.
  • Does my handset have a headset jack?
    Yes, the handset included in this system has a 2.5 mm headset jack. We recommend using the Panasonic headset model: To order additional/replacement accessories, call 1-800-332-5368 or visit www.panasonic.com.
  • Does it have speaker phone?
    Yes. Only the handsets would have the speaker phone option.
  • Does it have an audible message alert wherein the phone beeps when I get messages on the machine?
    No, the Answering system does not have an audible alert, when you receive new messages on your machine it will only have the message indicator flash but it will not beep.
  • Could I use any regular not-rechargeable AAA batteries with this product?
    No. Use ONLY Ni-MH batteries AAA (R03), which is specified in the operating instruction book. WARNING: DO NOT USE ALKALINE OR HEAVY DUTY BATTERIES.
  • Can I wall mount this phone?
    Yes. The base unit is wall mountable, there are 2 holes at the rear of the base from where you can hang the unit to the wall.
  • Can I put a belt clip on the handset?
    Yes. The system includes a belt clip in the package.
  • Can I change the language display on my cordless phone from English to Spanish?
    Yes you may change the language from English (default) to Spanish. To do this, follow the steps provided:
    1. Press [MENU] on the handset
    2. Press [#] [1] [1] [0]
    3. Press your [&#9650;] or your [▼] to select your desired setting
    4. Press [SAVE] then OFF
  • Can I change the font size on the screen on my phone?
    No. The font size is fixed and there is no option to change it on the handset.
  • Can I change the channel of my phone?
    The product operates in the frequency range of 1.92 GHz to 1.93 GHz. The frequency is fixed and the channel cannot be changed, the telephone goes thru the bandwidth automatically.
  • Can I change the backlight timer on my phone? It keeps on turning off the back light.
    No. The handsets are preset for backlight, it is not programmable. When the handset goes idle, it will turn off the backlight to save battery charge.
  • Can I block calls using my phone?
    Yes. Caller ID service is required to identify phone numbers to match what you have stored on the call block list. The unit is capable of blocking up to 250 phone numbers, if you have more than 250 numbers to block then subscribing to a call block service from you phone company is an option.
  • Can I access my answering machine while I am away from home?
    Yes. You can access the answering machine remotely by dialing your phone number on any touch tone phone to call it and as soon as you hear your greeting message play, enter your mailbox password or remote code and follow the voice prompt, as soon as you are done listening to your messages you can hang up.
  • Boost shows up on my handset. How do I get rid of it?
    The clarity booster is a feature that can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. When this feature is turned on, [BOOST] is displayed.
  • Are there any setup tips about the location of the main base unit in relation to range and audio quality?
    Yes. To optimize the range / audio quality, please be aware that metal objects / devices within proximity of the main base unit (less than a few feet), may block base cordless signal to reach the cordless handsets, resulting in deteriorated audio/poor sound quality:
    - Personal computer
    - Fax machine
    - External hard drive
    - Cash register
    - Metal tray for stationary
    - Metal file cabinet
    - Other metal materials
    If you experience distorted audio on the cordless handsets at extended distance/certain spots, please check for the presence of these metal objects/devices, clear them (relocate the main base unit, if necessary) and you should hear better audio afterwards.
  • Are the keypads to my handset supposed to be back lit?
    Yes. The supplied handset for this model has a keypad back light.
  • How do I use call waiting?
    To use call waiting, you must first subscribe to the call waiting service of your service provider/telephone company. If you already have the service activated on your phone line you will hear a few beeps during a call to place the first person on hold and answer the second party, press [FLASH] OR [CALL WAIT] button on the handset. The current call is then put on hold, and the other call is answered. You can press [FLASH] OR [CALL WAIT] button to go between the two calls as often as needed.
  • How do I unblock a number from my call block list?
    To unblock a number do the following procedure:
    1. On the handset press [MENU]
    2. Press [#] [2] [1] [7]
    3. Press the [&#9650;] or the [▼] to select your desired entry
    4. Press the softkey [ERASE], press [SELECT] on "Yes"
    5. Press [OFF] to exit the setting.
  • How do I turn on my answering machine?
    To turn on the answering machine on the base unit, just press the answer on button, the light indicator will turn on to confirm that your answering machine is ready to pick up messages. To turn on or off the answering machine using your cordless handset, perform the following steps:
    1. On the handset, press [MENU]
    2. To turn on answering machine press [#] [3] [2] [7] or turn it off by pressing [#] [3] [2] [8]
    3. Press OFF
  • How do I turn on and off the call sharing feature on my handset?
    Call sharing is a feature which allows you to join an existing outside call on any extension handset registered to your base. You may choose to have this feature on or off and it needs to be set separately on each handset.
    1. On the handset press [MENU]
    2. Press the pound sign [#] [1] [9] [4]
    3. Select your preferred setting by highlighting [ON] or [OFF]
    4. Press [SAVE] then press OFF on the handset to exit.
    Click here for Help &amp; Tutorials
  • How do I turn on and off the auto talk feature on my handset?
    You can answer calls simply by lifting the handset off the base unit or charger. The auto talk feature will not work if the cordless handset is off the base or charger. You do not need to press [TALK]. To turn this feature on or off, follow these procedure:
    1. On the Handset press [MENU]
    2. Press the pound sign, [#] [2] [0] [0]
    3. Press [0] for off then press [SAVE] then OFF to exit operation.

    Feature needs to be set separately on each handset.
  • How do I turn off the Talking Caller ID on my phone?
    To turn off Talking Caller ID at the base, press [MENU] [#] [*] [1] [6] [2], and press [&#9650;] or [▼] to turn the base Caller ID on or off. To turn off Talking Caller ID at one of the handsets, press [MENU] [#] [1] [6] [2], and press [▲] or [▼] to turn the handset Caller ID on or off. Note that the base and each handset are programmed individually.
  • How do I turn off the key tone on this handset?
    The default setting is on, if you wish to turn off the key tone follow these procedure:
    1. On the handset press [MENU]
    2. Press [#] [1] [6] [5].
    3. Press [1] for ON or [0] for OFF
    4. .
    5. Press [SAVE] to save your preferred setting then press [OFF] to exit.
  • How do I transfer external calls when using a cordless handset?
    During an external call:
    1. Press [INT] once to put the call on hold.
    2. To page another handset, scroll thru the handset numbers (if multiple) then press [SELECT].
    3. Wait for the paged party to answer.
    4. Press [OFF] to complete the transfer. The outside call sill be routed to the destination handset.
  • How do I set up the answering machine?
    Your own greeting message can be set up through the handset only.
    To record the greeting message, press [MENU] [#] [3] [0] [2]. With the up/down key, scroll to "YES" and then press [SELECT]. After a beep sounds, speak clearly (2 minutes max). Press [STOP] to complete the recording then press [OFF]. To turn the answering machine on, you can either press the ANSWER ON button on the base or on the handset, press [MENU] [#] [3] [2] [7] the press [OFF].
  • How do I set up speed dial on my phone?
    You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Press and hold the desired speed dial number, choose from 0 to 9 then press [ADD], Scroll to "Manual" then press [SELECT]. Enter the party's name then press [OK] Dial the party's phone number then press [OK], press [SELECT].
    If you have a phonebook item which you want stored on your speed dial number then follow the same procedure as above but scroll down to "Phonebook" instead of "Manual" then scroll to the desired item then press [SAVE]
    Note: If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.
  • How do I set up my answering machine?
    • Press the [ANSWER ON] button on the base to turn on your answering system. The answer on indicator should be lit.
    • Record your greeting message. The unit uses the Pre-recorded greeting which you can change if you prefer to use your own.
    • The default number of rings on the telephone are 4 rings before it answers a call. You may choose to change your ring count from 2 rings (minimum) to 7 rings (maximum).
  • How do I set the date and time on my handset?
    Using the handset, press [MENU] [#] [1] [0] [1]. Enter the date in the order month, date, year using two digits for each, then press [OK]. Now enter the hour and minute using two digits for each; press [*] to select between AM and PM, then press [OK]
  • How do I send my phone in for repair?
    It is recommended to exhaust all troubleshooting steps before unit is sent for repair. If the procedure won't work and the telephone was purchased within a year, ship the unit to Panasonic Exchange Center address: 4900 George McVay Drive, Suite B No.12, McAllen, TX 78503. We recommend UPS. Carefully pack in a padded shipping carton and include all accessories. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. Refurbished replacement is to be delivered within 7-10 business days.
  • How do I scroll thru the menu selection on this handset?
    You can scroll thru the menu selection by pressing the [&#9650;] or the [▼] button, it is the biggest button in the handset located in between the [TALK] and [OFF] button.
  • How do I retrieve the pre-recorded greeting?
    If you erase or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. Do the following procedure:
    1. On the handset press [MENU]
    2. Press [#] [3] [0] [4]
    3. Press the soft key [YES]
    4. Press [OFF]
    . Click here for Help &amp; Tutorials
  • How do I retrieve erased messages?
    You can no longer retrieve deleted messages from the machine. Once you erase a message it gets deleted from the phone's memory.
  • How do I reset the handset?
    At the back of the handset, press the notch of the handset cover firmly, and slide it to open the battery compartment. Remove the batteries completely and install them back again. When installing the batteries, avoid touching the battery ends or the unit contacts.
  • How do I reset my phone?
    To reset the phone system, unplug the main base from the electrical outlet and remove the batteries for 5 seconds. Install the batteries and replug the base. Do not reset your phone unless necessary.
  • How do I remotely turn on my unit's answering machine using a touch-tone telephone?
    You can turn on your unit's answering system remotely by performing the following steps.
    1. Dial your phone number using any touch tone phone.
    2. Let the phone ring 15 times. The greeting message is played back indicating the machine is already turned on. You can either use your remote code to continue to access your messages or hang up.
  • How do I record a greeting message?
    To record a greeting message or outgoing message, Press [MENU] [#] [3] [0] [2] and select [YES] on the handset, as soon as you hear a beep, start recording your message. To stop recording press [STOP] on the handset.
  • How do I properly charge my handsets?
    To ensure that the batteries charge properly, clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to the exposure of grease, dust, or high humidity. You may place the handset on its cradle after every use without damaging the batteries. Remember that the battery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. Charge the battery(ies) provided only with the specified charger and for best performance, we recommend using the Panasonic rechargeable batteries.
    It is normal for the handset to feel warm during charging.
  • How do I play back messages on the answering machine?
    When new messages have been recorded, the message indicator flashes. Press Play [►] on the base. If you would like to listen to the message using the handset, press [MENU] then [PLAY] on the handset. You can also press [MENU] [#] [3] [2] [3] and the phone will automatically play the new messages on the handset.

    NOTE: If there are no new messages in the answering system, [PLAY] is not displayed.

  • How do I order additional accessory handsets?
    To purchase additional accessory handsets please visit our website at http://shop.panasonic.com/shop/phones-and-fax-telephone-accessories.
  • How do I operate my answering machine?
    The answering system can answer and record calls for you when the line is not in use and you are unavailable to answer the phone. Press your [ANSWER ON/OFF]to turn on your machine. When the answering machine picks up a call and records a message the [PLAY] button on the base flashes. Press the [PLAY] button on the base to play the message. While listening to the message, you may choose to skip it by pressing the &#9658;►
    To Repeat a message, press ◄◄. To erase a message, press the button [ERASE] while the message is being played.
  • How do I know how many messages are recorded?
    The base unit for this model does not have a message counter feature. It would only announce the number of new messages during message play back from the base.
  • How do I install my brand new phone?
    After you open the box of your newly purchased phone, make sure you keep your receipt to validate the warranty of your phone. Check if all items and accessories that are supposed to be included in the box is complete, such as the batteries and the line cord etc. Follow these procedure to install and set-up he unit before use.
    1. READ the operating instructions Safety precautions before use.
    2. Use only the supplied Panasonic AC adaptor PNLV226, plug the tip at the main base unit and plug the adapter directly on a power outlet without any obstruction. Ensure that the AC outlet is installed near the product and is easily accessible.
    3. Use the supplied line cord and plug the cord at the back of the base securely, and the other end needs to be plugged in your telephone jack, make sure that the cord clicks when plugging the line cord on the base and the wall jack. You may now check if you can hear a dial tone when you lift the handset from the base.
    4. Remove the handset cover at the back of the cordless handset and insert the supplied rechargeable batteries inside. Confirm you install the batteries on its correct polarities, positive (+) and negative (-).
    5. USE ONLY Ni-MH batteries AAA (R03) size.
    6. Charge the new batteries by placing the cordless handset on the cradle. Initial charging needs to be 7 hours.

    After charging the handset, you may now start programming the handsets for your preferred settings.

  • How do I get rid of 'ECO' on my handset display?
    The intelligent Eco Mode reduces power automatically when the handset is close to the base unit to allow extended talk time. Battery life when using Talk button is about 13 hours when in Eco Mode. This is a feature of the phone that turns on automatically there is no procedure to disable it on the handset. ECO mode is turned off when the clarity booster is activated.
  • How do I forward calls from my phone to another number?
    This is a service that you can have your phone company activate on your line. The phone is compatible with this service as long as you have call forwarding subscription.
  • How do I erase my greeting message and use the pre-recorded or built-in greeting message?
    To erase your greeting message and use the default greeting message, press [MENU] [#] [3] [0] [4] on the handset and select [YES] then turn the handset OFF.
  • How do I erase messages on the answering machine?
    To erase a message, play back that message, and press [ERASE] on the base. To erase all messages, while the base is idle, press [ERASE] twice.
  • How do I deregister a handset which is no longer in use?
    To deregister a handset, perform the following steps:
    1. Press [MENU]&#8594;[#] [1] [3] [1] on the handset
    2. Enter [3] [3] [5][OK]
    3. Select the handset you want to cancel by pressing the desired handset(s) number
    4. Select [OK][▲]/[▼]: "YES" →[SELECT]
  • How do I copy or enter my phone book items to my handsets?
    No. Once you add an entry to your phone book directory on one handset, it is stored in other handsets. This feature is known as shared phone book.
  • How do I clear 'New Voicemail' on my handset's display?
    Your telephone is alerting you that you have a new voice message from your phone company's assigned Voice mailbox. Procedure to access your voice mailbox would vary depending on the instructions of your phone company / service provider. Once you listen to your new messages, "New Voicemail" should be cleared from the handset/
    Note: If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding [#] until the handset beeps.
  • How do I check my voicemail using the handset?
    Some phone companies provide a flat-rate service which includes voice mail, it is a voice mailbox system assigned to your phone line that stores telephone messages which can be retrieved at a later time. Procedure to access your voice mailbox would vary depending on the instructions of your phone company. In order to listen to your voice mail messages, you must dial your service provider/telephone company's voice mail access number. Once you have stored your voice mail access number, you can dial it automatically by pressing the soft key for [VM] on the handset
    Note that the function [VM] will not appear on the display if you haven't stored your the voicemail number provided by your phone company to the Panasonic telephone. To store your voicemail access number, follow the procedure below:
    1. On the handset press [MENU] then press the pound sign [#]
    2. Press [3] [3] [1]
    3. Dial your voice mail access number
    4. Press [SAVE] then press the OFF button

    If you do not know what is your Voicemail access number, PIN or password, please contact your phone company.
  • How do I check my own greeting message?
    To play back your current greeting, press [MENU] [#] [3] [0] [3] on the handset, the greeting message will play. To exit, press [OFF].
  • How do I change the ringer tone of my handset?
    To change the ringer tone of the handset. Press [MENU] on the handset then press [OK] to Select "INITIAL SETTING". Press [OK] again for "RINGER SETTING". Press [&#9650;] or [▼] repeatedly to get to "RINGER TONE" then press [OK] you can choose from the selection on the phone by pressing [▲] or [▼] Press [OK] to select your desired ringer tone.
  • How do I change the ring tone when receiving an outside call on the base?
    To change the ringer tone on the handset, press [MENU], [#] [1] [6] [1], and press [▲] or [▼] to play your selection. As soon as you have picked your desired ringer tone, press [SAVE].

    Note: that if you have multiple handsets, you would need to repeat this procedure on each of the handsets if you want all handsets to ring the same tone.
  • How do I change the remote code to access my machine when I'm away?
    A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. To prevent unauthorized access to this product, we recommend that you regularly change the remote code. To change your answering machine's remote code do the following procedure: On the handset, press [MENU]. [#] [3] [0] [6]. Enter your 3 digit remote code. Press the soft key [SAVE] then press OFF.
  • How do I change the number of rings before my answering machine picks up?
    You can change the number of times the phone rings "Ring count" before the unit answers calls. Change your answering machine's ring count by following these procedure:
    1. On the handset press [MENU]
    2. Press the pound sign, [#] [2] [1] [1]
    3. Highlight your desired number of rings by scrolling thru the selection using your [&#9650;] or [▼] button
    4. Press [SAVE] then press OFF
  • How do I change the handset's name on my display?
    Each handset can be given a customized name. It is a useful feature to identify your cordless phones. To change the label of your handset, perform the following steps:
    1. Press [MENU] on the handset
    2. Press the [#] [1] [0] [4]
    3. Key in the letters to label your handset (maximum of 10 characters only)
    4. Press [SAVE]
    5. Press your [&#9650;] or your [▼] to select your desired setting
    6. Press [SELECT]
    7. Press [SELECT] again and press [OFF]
  • My handset says "line in use". How do I clear it?
    Make sure that the base unit has power. "Line in use" is displayed if the line is currently active on a call. If you have multiple handsets, it is possible that one of them is turned on so check the rest of the handset and turn it off.
    Check if all connections are secure and plugged properly from the wall and from the back of the base unit. If none of the handsets are in use, try to unplug the base unit from the power outlet for 5 seconds then replug and test the line by calling you line using your cell phone or a different phone line.
  • My handset keypad keeps blinking.? What's wrong?
    This is normal. Please recharge handset. When the battery voltage becomes low, the battery icon on the handset LCD will blink. If you don't recharge handset battery, the LED will shut off, and the Keypad light will blink to warn you to put the handset on the charger.
  • My handset is not charging. What can I do?
    First make sure you are using the Rechargeable batteries that came with the unit. The correct part numbers will be HHR-55AAABU or HHR-4DPA. Try charging the handset on the base charger. If that works, make sure the charging cradle is connected to the AC Adaptor, and the AC Adaptor is firmly plugged into the wall. Have you taken the batteries out of the handset recently. This will reset the battery indicator, so even though the batteries may be fully charged, the indicator will show low battery. Place the handset on the charging cradle for 7 hours to show full battery. Also, be sure the batteries are inserted properly. The '+' terminal should be showing at the top of the right battery and the bottom of the left battery.
  • My handset displays, "Please lift up and try again".
    You attempted to dial from the cordless handset while located in the charger. Lift the handset out of the charger and try again. If the same error message appears on the handset after lifting the handset from the cradle, reset the handset by removing the battery from the phone then re-install them again.
  • My handset displays, "Insert battery" What does this mean and how do I clear this error from my display?
    A wrong type of battery such as Alkaline or Manganese was inserted. Use only the Nickel Metal Hydride rechargeable batteries. Never use Alkaline or any other types as these could damage your handset.
  • My handset displays 'Line in use' and I cannot receive incoming calls. What does this mean and how do I clear this error from my handset?
    Someone might be using the line. If you have multiple handsets, please check all of your cordless phones if they were properly hung up. If you have already done this, and the error 'Line in use' is still appearing on the phone, check if your other phone is getting a dial tone. If the problem seems to be happening with all of your phones, then you might be experiencing a possible line problem, you can try to plug the telephone on a totally different line like your neighbor's or friend's house.
    If the problem is only happening with the Panasonic phone follow these procedure:
    1. Unplug your Panasonic phone both from the phone jack.
    2. Try relocating the telephone on a different phone jack inside the house.
    3. Try using a different line cord if you have any other available.
    4. If steps above still doesn't work, telephone might need service, please refer to your instructions warranty page for procedure.
  • My handset displays "1 missed call" or "# missed calls". What does it mean, and how do I clear it?
    If a call is not answered, the unit treats it as a missed call. The display shows "Missed call". This lets you know if you should view the caller list to see who called while you were away. Note: Even when there are unviewed missed calls, "Missed call" disappears from the standby display if the following operation is performed by one of the units:
    • A handset is replaced on the base unit or charger.
    • Pressing [OFF] on a handset.
  • My Caller ID is not working on my phone. How do I fix it?
    You must confirm that your Caller ID service is working properly from your phone company and the best way for you to verify is to check other Caller ID compatible phones in the house. If the rest of your other phones is not showing the caller ID number as well, it is recommended to call your phone company. If problem is only happening on your Panasonic phone then have the phone plugged in on a different phone jack to test, you may also change the line mode setting on your phone if it doesn't work. To change line mode, on your handset press [MENU] [#] [1] [2] [2] then change setting from default "B" to "A" then press [SAVE] then [OFF].
  • My caller ID information is displayed late.
    Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.

    CAUTION: To avoid permanent damage, do not use a microwave oven to speed up the drying process.
  • My caller ID information is displayed late.
    Depending on your service provider or telephone company, the unit may display or announce the caller's information at the second ring or later. Move closer to the base unit.
  • My answering machine says "memory full" and it no longer records messages. What can I do about this?
    The error message indicates that the answering machine's maximum recording time was reached. You need to erase messages from your answering machine for it to start recording new messages again.
  • Missed calls are appearing on my screen. Why?
    If a call is not answered on a specific handset, the unit treats it as a missed call. The display shows "Missed call". This lets you know if you should view the caller list to see who called while you were away.
    Note: Even when there are unviewed missed calls, "Missed call" disappears from the standby display if the following operation is performed by one of the units:
    1. A handset is replaced on the base unit or charger.
    2. Pressing OFF on a handset.
    3. View your caller list.
  • Messages are announced out loud, how do I turn off call screening?
    The call screening feature allows you to monitor a message from the base and the handset's speaker when the answering system is recording a message. The default setting is "On". To turn this feature off, follow these procedures:
    1. You can either use the base or the handset. Press [MENU] [#] [3] [1] [0]
    2. Use your [&#9650;] or your [▼] to select "Off"
    3. Press [SAVE]
  • Is this phone hearing aid compatible?
    Yes. The phone system passes the FCC requirement no. 68 and it also complies to the "TIA-1083" standard. Phone has have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.
  • Is there a message indicator on this phone? Will it light up when there is a new voice mail message?
    Yes. Each of the handset included in the package has a message alert indicator. "New Voice Mail" will be displayed on the handset and the message indicator light flashes slowly on the handset when you receive a voicemail message from your provider.
  • Is the base unit wall mountable?
    Yes. You may attach on the base the provided wall-mounting adaptor inside the box to mount unit on the wall.
  • If I buy two bases attached to the same phone number, will I be able to call one base (or its handsets) with the other?
    No. Only intercom calling among handsets registered to the same base are possible.
  • I want to talk to 2 external numbers on my one line phone. What is "three way calling" and how do I perform this?
    A Three way call is a phone call in which the person who is calling wishes to talk to two other parties. It is a service offered by phone companies which allows you to call a party and by pressing the [Flash] button it allows you to receive another dial tone to call another phone number. Pressing [Flash] again will join all three parties together.
  • I took the batteries out of the handset just for a second and when I put them back in, the low battery icon flashes and the screen displays "charge for 7h". Is this normal?
    This is normal. When the batteries are taken out, the handset loses track of how much the batteries are charged. You may use the phone normally, but the battery indication will not be accurate until charged for about 7 hours.
  • I hear a series of beeps before my dial tone. Is this normal?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal sent by your phone company to let you know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal. Please contact your phone company so you may know the procedure on hot to retrieve those message stores on your phone company's mailbox.
  • I have stored a number on my answering machine for message alert call, how do I turn it on?
    On the handset press [MENU] then the pound sign [#]. Press [3] [3] [8] Scroll to "On/Off" then press [SELECT]. Scroll to "On" then press [SAVE].
  • I have programmed the date and time on my phone but the information changes. Why does the date and time change automatically?
    If you are subscribed to Caller ID from your phone company, the unit's date and time setting will be automatically adjusted when caller information is received. If you do not wish for this feature to work, press [MENU] [#] [2] [2] [6] on the handset, then press [0] to select "Manual" and press [SAVE]
  • I have multiple handsets and I do not want the rest of the handsets to listen to my conversation when I am using my phone. How do I do this?
    The privacy mode is a feature on our Panasonic phones that prevents others from barging in, sharing a call or listening in to conversations when one of the handset is in use. You can Press [MENU] [#] [1] [9] [4] and select "ON" then press [SAVE] on the handset, this will activate the privacy mode for that one handset, you would need to repeat the same procedure for the rest of the registered handset if you would want this feature to be turned OFF for the entire system.
  • I have DSL service, will my phone be affected if I connect it on the same phone line?
    No. Digital Subscriber Line (DSL) is a service provided to connect over the internet transmitting over your local telephone line and is subsequently separated by filtering, so a DSL filter is recommended to eliminate noise on the background on your phone. Most DSL service providers would have the filters available for their subscribers, you may also check out your local electronic stores for availability. If you are not getting any service from your phone there is still a possibility of a phone line problem even if your DSL is working properly.
  • I can't hear beeps any more while dialing a phone number, or using the menu. How can I turn it back on?
    The Key Tone feature is turned off. To change the setting, press [MENU] [#] [1] [6] [5]and press [&#9650;] or [▼] to switch between off and on, then select [SAVE].
  • I can't hear a dial tone on my phone.
    Make sure that the base unit has power. Check if all cords are secure and plugged in properly from the wall and from the back of the base unit. Try to plug the unit to a known working jack then test again. If you have a different phone on the same line, and you are also not getting a dial tone, it is possibly a line problem. If that is the case, it is advised to contact your local phone company for further assistance.
  • I cannot operate the answering system.
    It is possible that:

    1. Someone is using the unit. Wait for the other user to finish and hang up.
    2. A caller is leaving a message. Wait for the caller to finish.
    3. The handset is too far from the base unit. Move closer to the main station.
  • I am trying to set up my phone and it says in the manual to press [OK], where is the button [OK] on my handset?
    The [OK] button is the middle soft key button. Soft keys are used in programming the phone system they are buttons that are not labeled on the Handset. They are located just below the screen on the handset and they function for whichever option is displayed on the screen.
  • I am experiencing Static and a humming noise in the background every-time I use my Panasonic phone. How do I fix it?
    If you are hearing static on your phone, reception breaks in and out or experiencing humming noise on the background while using your cordless phone, it might be caused by a transmission or electric interference, noise can also come from the phone lines, it would be best to locate the source of the interference first and a simple method of determining this would be to verify if static is heard on your other set of phones aside from the Panasonic. You can also try to relocate or plug the Panasonic phone to a different area where there is less interference. If you are subscribed to DSL service it is recommended to use a DSL filter, most DSL service providers would have the filters available for their subscribers, you may also check out your local electronic stores for availability.
  • How to add a Phonebook Entry?
    To add a phonebook item, follow these procedure:
    1. On the handset press the soft key for the Phonebook Icon then press [ADD]
    2. Enter the name by pressing the corresponding alphabet from the numbers on the handset keypad, press [OK]
    3. Dial the phone number of the contact then press [OK]
    4. Press the [&#9650;] or the [▼] button to select group then press [SELECT] twice on the handset.
  • How much radiation do these phones output?
    This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. RF transmission power is 115 mW (max.)
  • How many messages can be stored on my answering machine?
    The total recording capacity (including your greeting message) is about 18 minutes. A maximum of 64 messages can be recorded.
  • How many items can I store on my phonebook?
    The shared phonebook allows you to make calls without having to dial manually. Any handset registered to the base unit can use the shared phonebook. You can add 50 names and phone numbers to the shared phonebook, and assign each phonebook entry to the desired group.
    Only 1 person can access the shared phonebook at a time.
  • How many items can I store on my phonebook?
    The phonebook allows you to make calls without having to dial manually. You can add 100 names and phone numbers to the phonebook, and assign each phonebook entry to the desired group.
    Only 1 person can access the shared phonebook at a time.
  • How many handsets can be used with one main base unit?
    Up to a maximum of 6 cordless handsets can be used with one main base unit.
  • How many characters can I put on my phone book?
    Your phone can store up to 16 characters for the name and 24 digits for the number.
  • How far can the handset reach if I have the range extender?
    Although it is not possible to give the range in actual distance using the KX-TGA405 Range Extender, it will increase the distance you can use the handsets from the base. The status light must be lit Green.
  • How does this phone system function during a power failure?
    During a power failure the base unit will work as a standard telephone using power from the telephone line, so you can make and answer outside calls with the corded handset. However, this operation may not work properly depending on area or the telephone line's condition. The base unit's speakerphone and the cordless handset(s) will not function during a power failure.
  • How does the power back up operation work?
    When a power failure occurs, the charged handset temporarily supplies power to the base dunit (power back-up mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and shared phonebook are available only when using a handset other than the handset supplying power to the base unit.
    Important:
    • If a handset is not placed on the base unit when a power failure occurs, "Base no power Press OFF" is displayed. After pressing OFF on the handset, place it on the base unit to start power back-up mode.
    • Power back-up mode will not work if the battery level of the power supplying handset is low
    • Do not lift the power supplying handset from the base unit during power back-up mode.
    • Do not touch the handset's charge contacts during power back-up mode.
    • If the battery level is low, the unit will not work sufficiently during power back-up mode.
  • How does phonebook sharing work?
    Phone book sharing occurs automatically between handsets. It is not necessary to manually copy entries in the phone book from one handset to the other. Also, a phone book entry deleted on one handset is deleted from the other handsets as well.
  • Will I damage the batteries by keeping the phone on the charger?
    No. The batteries that comes with your telephone do not suffer from the same memory effect that older batteries used to have. It is safe to keep the handset on the charger whenever it is not in use. Use only the Nickel Metal Hydride rechargeable batteries. Never use Alkaline or any other types as these could damage your handset.
  • Why does my handset display "Please lift up and try again"?
    You attempted to dial from the cordless handset while located in the charger. Lift the handset out of the charger and try again. If the same error message appears on the handset after lifting the handset from the cradle, reset the handset by removing the battery from the phone then re-install them again.
  • Why do I hear an echo on my handset?
    This is normal. When you first use your phone, there may be a slight echo because the microphone is being calibrated. This will occur again if the base is disconnected from the power outlet, or after a power outage. If echo continues for several days try to reset the handset by removing the batteries from the cordless handset for a few seconds.
  • Why do I hear a series of dial tones followed by a continuous dial tone after I lift the corded handset or press [TALK] on the cordless handset?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal (sometimes called "voice mail tones" or "stutter tones") sent by your phone company to let users know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal. Please contact your phone company so you may know the procedure on hot to retrieve those message stores on your phone company's mailbox.
  • Why do I hear a series of beeps before my dial tone?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal sent by your phone company to let users know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal.
  • Why am I not hearing my greeting message when my answering machine picks up?
    The answering machine is not designed to play the greeting message out loud when machine answers a call.
  • Which phone model series do not have the Time Adjustment feature?
    The following phone model series do not have the Time Adjustment feature: KXTG401x, KXTG402x, KXTG422x, KXTG427x, KXTG271x, KXTG272x.

    We recommend you contact your Phone Service Provider for a solution if you have one of the models mentioned above.
  • Which corded headset(s) can be used with the phone system?
    The following Panasonic headsets are recommended: KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430. To order additional/replacement accessories, call 1-800-332-5368 or visit www.panasonic.com.
  • Where is the OK button?
    The handset features soft keys located right below the screen. By pressing a soft key, you can select the feature shown directly above it on the display. When you read the word [OK] on the handset, just press the corresponding soft key button below it.
  • Where can I order parts for my product?
    You can order parts and accessories for your machine from our Parts & Accessories Department at 1-800-833-9626.
  • Whenever I try to make a call my handset displays "Busy". How do I fix this?
    1. The called unit is in use.
    2. Other units are in use and the system is busy. Try again later.
    3. The handset you are using is too far from the base unit. Move closer and try again.
    4. There is no handset registered to the base unit matching the handset number you entered.
  • When the alarm on a handset is set, will the alarm on the other handsets sound or is it only that handset's alarm that sounds?
    Only that handset's alarm will sound. To have the alarms of other units sound, you would have to set them individually.
  • When I answer an incoming call, I have to say "hello" several times before the other party can hear me. How can I fix it?
    Make sure that the handset is not on "MUTE". If the problem still occurs, unplug the base unit from the power outlet for 5 seconds and remove the batteries from the handset then put everything back and test the telephone. If the procedure won't work and the telephone was purchased within a year, ship the unit to Panasonic Exchange Center address: 4900 George McVay Drive, Suite B No.12, McAllen, TX 78503. We recommend UPS. Carefully pack in a padded shipping carton and include all accessories. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. Refurbished replacement is to be delivered within 7-10 business days. To submit a repair request online, click here
  • What should I do if my base unit does not have power and there are no lights lit?
    If your base unit is not receiving power then you can try to have the base unit plugged on a different power outlet to test. If you have multiple handsets, you can try to use the AC adapter from one of the smaller chargers and have it plugged on the base. If you have followed the steps mentioned above and you base unit still does not have power, the base unit needs service. Please refer to your operating instructions warranty page for procedure.
  • What should I do if my Answering Machine messages are not being recorded?
    Make sure the answering machine is turned ON by pressing the [ANSWER ON] button till the indicator lights up on the base. Check your greeting message. You may have an extremely short greeting message (less than two seconds) or your Greeting may have been erased. If that is the case, record another greeting message. If you have voice mail from your local phone company adjust the ring count on the answering machine to less than the voice mail ring count. Also, you if you have another phone on the same line that has an answering machine, be sure to turn OFF that other answering machine.
  • What should I do if I can't return a call from the numbers I have on my caller ID and it keeps on giving an area code for local numbers?
    Check the phone number if it is on the correct format, if it shows an area code and you would want that edited, Press the [&#9668;] for CID select which phone number you want to edit by pressing [▲] or [▼] and press [EDIT] repeatedly until it shows the correct number then press TALK. Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the Handset the way you programmed it.
  • What kind of batteries can I use for my handset?
    One cordless handset uses two (2) Ni-MH (nickel metal hydride) type rechargeable AAA batteries. To order replacement battery, please use order No. HHR-4DPA and contact 1-800-332-5368 or click here. The Panasonic rechargeable AAA batteries are recommended for best cordless handset performance. Replace batteries only with a nickel metal hydride (Ni-MH) type of battery.
  • What is voice mail and how do I listen to my voice mail messages?
    Some phone companies provide a flat-rate service which includes voice mail, it is a voice mailbox system assigned to your phone line that stores telephone messages which can be retrieved at a later time. Procedure to access your voice mailbox would vary depending on the instructions of your phone company. If you do not wish to use this added service, please contact your telephone service provider to deactivate your Voice Mail subscription.
    If you have a built-in answering machine with your telephone and you prefer to use it instead of your voice mail subscription, then it is recommended to change the ring count of the Voice Mail service so that the answering system can answer the call first. To do so, consult your telephone service provider.
  • What is the warranty of this telephone?
    This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Coverage of warranty is applied to telephone products purchased within a year which starts with the date of original purchase. Please keep a copy of the valid receipt as a requirement for the warranty coverage.
  • What is the remote access code by default for accessing the answering machine remotely?
    The default code for accessing the answering machine remotely is "111". To program your own code, perform the following steps on handset or on base unit:
    1. Press [MENU][#] [3] [0] [6].
    2. Enter the desired 3-digit remote access code →[SAVE].

    Remote code can only be changed using the Panasonic phone it cannot be done remotely.

  • What is the maximum recording time for each message?
    The default setting for the maximum message recording time for each message is 3 minutes. However, you may change it to 2 minutes or 1 minute by pressing [MENU] [#], then [3] [0] [5], Then follow the instruction on the display.
  • What is the 'equalizer' for?
    This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. The feature can only be activated during a call. Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. This feature is not available while using the speakerphone. Here are the steps to turn to set your equalizer feature:
    1. During a call press, [MENU] on t he handset
    2. Press [SELECT] on "Equalizer"
    3. Press your [&#9650;] or [▼] to select your desired setting
    4. Press [OK] to exit.
  • What is the Auto talk feature?
    Auto talk is a feature which lets you answer calls simply by lifting the handset off the base unit or charger. You do not need to press the [TALK]. The Auto talk feature will not work if the cordless handset is off the base or charger. Feature needs to be set separately on each handset.
  • What is my phone's voltage?
    Use only the supplied Panasonic AC adapter. The phone operates on 120V, 60 Hz.
  • What is FSK?
    Frequency Shift Keying or FSK is a signal used by service providers to alert you that you have a new voicemail message recorded on your assigned mailbox.
  • What is Eco Mode?
    The intelligent Eco Mode reduces power automatically when the handset is close to the base unit to allow extended talk time. Battery life when using Talk button is about 13 hours when in Eco Mode.
  • The screen on my handset is stuck? How do I fix this?
    Reset the handset by removing batteries for at least 5 seconds, then put them back.
  • The indicator light on the handset flashes slowly.
    The handset indicator light will flash for the following reasons:
    If the handset indicator light is flashing rapidly it means a call is being received.
    If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly as well.
    If the message indicator is flashing slowly, it means that there is a new message recorded on the built-in answering machine, once you listen to the message the indicator light should stop flashing.
    If 'New Voicemail' is displayed on the handset and the indicator flashes slowly, it means you have a new voicemail message, on your mailbox assigned to you by your phone company. If you are unaware of the voicemail subscription you may contact your phone company to get your voicemail PIN.
  • The indicator light on my handset is flashing. What does it mean?
    The light indicator on the handset should always be constantly lit while on the charger. The only time that the light should go off is when the batteries are already fully charged. If the light indicator is flickering or flashing it means that the handset is not charging properly, lift the handset off the cradle then try placing it back on the charger again. You can also try charging the handset on a different cradle to test.
  • The date and time always changes even if I save the settings. What should I do to fix this?
    You have the "Time Adjustment" feature set to "Auto". This feature allows the unit to automatically adjust the date and time setting when caller information from your landline service is received. To use this feature, set the date and time first. To set this feature to "Manual" follow these procedure:
    1. On the handset press [MENU]
    2. Press [#] [2] [2] [6]
    3. Press [2] for manual
    4. Press [SAVE] then press [OFF] to exit the setting
  • The ANSWER ON indicator on the base unit flashes rapidly.
    Answering system message memory is full. Delete old messages so that new messages can be recorded.
  • Sometimes the phone rings once, then stops, but shows a message on the Handset LCD screen that says "caller blocked". What does this mean?
    Caller ID subscription is needed to have the call block to work. The call blocking feature rejects callers that are in the block list. To receive these calls again, you need to remove those entries from the block list. To access this list, press [MENU] [#] [2] [1] [7], and press [&#9650;] or [▼] to scroll through the list. Once you find an entry to delete, press [ERASE], then press [Yes] to confirm.
  • Should the caller ID number show on the base display?
    Yes, if you are subscribed to a caller ID service, Caller ID number should show on the base unit's display.
  • My telephone says 'Check Tel Line' and I cannot call out. What will I do to fix this?
    The supplied telephone line cord has not been connected yet or not connected properly. Check the connections by making sure the line cord is secure. When you plug the phone line cord at the back of the phone make sure you hear it click. You can also try to have the telephone plugged on a different phone jack inside the house, if there is none, try to take it to a neighbor or friends house to be tested, to be sure you are not having a line problem.
  • My handset turns off, what do I do to fix it?
    Use ONLY Ni-MH batteries AAA (R03), which is specified in the operating instruction book. WARNING: DO NOT USE ALKALINE OR HEAVY DUTY BATTERIES. Reset the cordless handset by removing the batteries from the handset for a few seconds and place it on the cradle for 7 hours. If you have multiple handsets, try interchanging the batteries with another cordless phone to check if you need to replace the battery.
SEE ALL FAQ'S